Luxman L-509Z

Ordered today, delivered tomorrow
Available within a week
Available within 1 to 4 weeks
Available on request
Available between 1 and 4 working days
No items found.

Rated output

120W + 120W (8Ω), 220W + 220W (4Ω)

Input sensitivity refers to the level of signal required to produce a specified output level. Input impedance refers to the electrical resistance presented by the input circuitry of a device.

PHONO (MM)2.5mV/47kΩ PHONO (MC-H): 0.3mV/100Ω PHONO (MC-L): 0.1mV/40Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/79kΩ MAIN IN: 1.1V/47kΩ

Want to experience this in person?

This product is waiting for you in Hilversum
Our experts will gladly answer your questions about any of our products
Get personalised advice about your listening space
Buy the product in the store or online

This product is available on request
Our experts will gladly answer your questions about any of our products
Get personalised advice about your listening space
Buy this product online

This product is currently not available online.
Get in contact to order this product
Contact

Description

More from this brand

"The latest reinforcement feedback engine literally brings music to life with LIFES* version 1.0

By only feeding back the distorted components generated during the journey of the audio signal to the final amplifier stage, LUXMAN's own 'ODNF' amplification circuit achieves excellent static properties and a natural sound quality as if it were a 'non-feedback' system. During the development of the M-10X flagship stereo power amplifier, launched in 2021, the technical concepts investigated there were retained and the circuit configuration, which had become very complex through years of improvements, was completely redesigned to achieve "LIFES" excellent, hi-fi sound reproduction and define a blueprint for the feedback motor for the next generation components. The L-509Z is equipped with independent LIFES modules that work simultaneously in each of the fully discrete pre and power sections.

The L-509Z is a pre-main amplifier worthy of the 'single-chassis separates' concept, integrating separate quality units in a single, elegant chassis and achieving an elevated level of musicality and unprecedented detail compared to other amplification circuits. The output section uses three-stage Darlington bipolar transistors in a quadruple parallel push-pull configuration to achieve excellent output power and almost perfect power linearity, similar to a stand-alone power amplifier, developing 120W+120W at 8 ohms and 220W+220W at 4 ohms. The result is a spectacular sound quality with an abundance of energy.

*ODNF stands for "Only Distortion Negative Feedback"

*LIFES stands for "Luxman Integrated Feedback Engine System""

Specifications

Rated output
120W + 120W (8Ω), 220W + 220W (4Ω)
Input sensitivity refers to the level of signal required to produce a specified output level. Input impedance refers to the electrical resistance presented by the input circuitry of a device.
PHONO (MM)2.5mV/47kΩ PHONO (MC-H): 0.3mV/100Ω PHONO (MC-L): 0.1mV/40Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/79kΩ MAIN IN: 1.1V/47kΩ
Output voltage PRE OUT:
1V
Frequency response.
PHONO: Frequency response from 20Hz to 20kHz with a deviation of ±0.5dB. LINE: Frequency response from 20Hz to 100kHz with a deviation of -3dB.
Total harmonic distortion.
0.007% or less (8Ω, 1kHz) 0.03% or less (8Ω, 20Hz to 20kHz)
Signal-to-noise ratio (IHF-A):
PHONO (MM): 87dB or more PHONO (MC-H): 70dB or more PHONO (MC-L): 62dB or more LINE: 106dB or more
Volume adjustment.
LECUA-EX
Amplification feedback circuit.
LIFES 1.0
Output configuration
Bipolar 4-parallel push-pull
Damping factor.
330
Maximum amount of tone control:
BASS: ±8dB at 100Hz TREBLE: ±8dB at 760Hz TREBLE: ±8dB at 10kHz
Power supply:
"230V~(50Hz) / 115V~(60Hz)" translates to "230 volts alternating current (50 hertz) / 115 volts alternating current (60 hertz)"
Power consumption.
390 watts, 150 watts when there is no signal, and 0.5 watts in standby mode.